Eclipse CD1000 Manual Del Propietário página 14

Operation
TRACK (FILE) UP / DOWN
Press the [
briefly.
CD
1
(MP3/WMA)
Press the [FUNC] button.
2
Press the [
button while [FUNC] is
blinking on the display.
Direct Track Selection
Press a button from [1] to [6]
briefly to select the track number
CD
corresponding to the [1] – [6]
button.
Fast Forward / Rewind
CD
Press the [
(MP3/WMA)
several seconds.
ATTENTION
• While fast-forwarding or reversing on an MP3 or WMA disc, you can only hear intermittent sound.
• When a CD is already loaded, press the [SOURCE] button to switch to the CD mode.
• This receiver can play back only the files of the same type which is first detected if a disc includes both audio CD
(CD-DA) files and MP3/WMA files.
• Use only "finalized" CD-Rs or CD-RWs.
• This receiver can play back multi-session discs; however, unclosed sessions will be skipped while playing.
• If no MP3/WMA music files can be found, a message [NO FILES] will appear.
• Playback may be intermittent when there is a scratch on a CD or when the recorded side is dirty.
14
] or [ ] button
+10] or [ -10]
] or [ ] button for
Advances to the next track (file).
Returns to the beginning of the track (file) being
played. Repeat turning for previous tracks (files).
Selects the 10th track, the 20th one, the 30th
one, ... and then the last one as follows:
When you are listening to the 26th track
for example, each press of the button will
advance to the 30th track, the 40th one, ... and
then the last one.
Selects the first track, the 10th one, the 20th one,
the 30th one, ... as follows:
When you are listening to the 26th track
for example, each press of the button will return
to the 20th track, the 10th one and then the first
one.
To select a track number from 7 to 12, press a
button from [1] to [6] for several seconds.
Fast - forwards.
Rewinds.