Parameter Setting For Wiring Options; Description Of The Various Additional Devices - SOMFY Home Motion ROLLIXO RTS Manual De Instalación

Rollixo RTS

8.2 Parameter setting for wiring options

Possible parameter
Dipswitch
setting
1 Cell self-test
2 Choice of cell type
3 Orange light 2s
warning
4 Choice of wired safety
edge type
5 Holiday mode parameter setting (see section 9.4)
6 Do not use
1 2 3 4
Prog
STOP

8.3 Description of the various additional devices

> Photoelectric cells
N.B.: In accordance with standard EN 12453 governing the safe use of
motorised gates and doors, the use of the TAHOMA control box to
automatically control a garage door or gate not visible to the user requires
the installation of a photoelectric cell type safety device with autotest on
the automatic control system.
receiver
Dipswitch 1 Dipswitch 2
Without auto- OFF ON
test
With auto-test
ON ON
If cells are removed, it is essential to create a bridge between
terminals 18 and 19.
It is compulsory to install photoelectric cells if:
- the automatic control device is being controlled remotely (user
unable to see it),
- automatic closure is activated.
h 24V dc 24V Cell Sec Cell
TX
14 15 16 17 18 19
Copyright © 2014 Somfy SAS. All rights reserved.
on off
Activated Deactivated
Photoelectric Electric eye
Activated Deactivated
Resistive Optical
Comments
Requires checking for
correct operation every 6
months.
Enables an automatic
test to be carried out to
check the operation of the
photoelectric cells each time
the door moves.
If the operational test is
negative, closure is in
downgraded mode (press
and hold down ).
1 14
TX
2 15
Test
Sec
RX
20
1 16
17
2
RX
3 18
5 19
> reflex photocell
N.B.: In accordance with standard EN 12453 governing the safe use of
motorised gates and doors, the use of the TAHOMA control box to
automatically control a garage door or gate not visible to the user requires
the installation of a photoelectric cell type safety device with autotest on
the automatic control system.
receiver
Dipswitch 1 Dipswitch 2
Without auto- OFF OFF
test
With auto-test
ON OFF
If cells are removed, it is essential to create a bridge between
terminals 18 and 19.
It is compulsory to install photoelectric cells if:
- the automatic control device is being controlled remotely (user
unable to see it),
- automatic closure is activated.
ref. 1841195
24V dc
h
14 15
ref. 9013647
Without auto-test ON
With auto-test
h 24V dc
14
Comments
Requires checking for
correct operation every 6
months.
Enables an automatic
test to be carried out to
check the operation of the
photoelectric cells each time
the door moves.
If the operational test is
negative, closure is in
downgraded mode (press
and hold down ).
24V Cell Sec Cell Test
Sec
16 17 18 19 20
Brown
Blue
Black
Grey
Cell
Dipswitch 1 Dipswitch 2
ON
ON ON
24V Cell Sec Cell Test
Sec
15 16 17 18 19 20
1
2
3
4
5
14
15
19
20
14
15
20
19
18
9