Rollixo RTS
> optical wired safety edge - Dipswitch 4 receiver set at off
Dipswitch 4 receiver position
If a wired safety edge replaces a radio safety edge, the radio safety
edge transmitter must be cleared (see section 13) to ensure the
wired safety edge is taken into account.
> Wired 8k2 resistive safety edge - Dipswitch 8k2 4 receiver set
to on
Dipswitch 4 receiver position
If a wired safety edge replaces a radio safety edge, the radio safety
edge transmitter must be cleared (see section 13) to ensure the
wired safety edge is taken into account.
> orange LeD (part no. 9017842)
Dipswitch 3 receiver set to ON → 2-second warning activated
Dipswitch 3 receiver set to OFF → No warning
ge
9
4 W max.
10
Stop
Safety Edge
KeySwitch
Sec
5
6
7
8
9
10
11
Stop
Safety Edge
KeySwitch
Sec
5
6
7
8
9
10
KeySwitch
Flash
24V dc
24V C
10
11
12
13
14
15
16
17
> Key lock
Successive presses cause the motor to move (initial position: door closed) as
per the following cycle: open, stop, close, stop, open, etc.
1
> alarm
It is essential to have programmed at least one remote control. The
alarm can only be stopped with a memorised remote control.
• installing and connecting the alarm
Mount the alarm to the receiver with the bolt provided.
Connect the alarm connector.
• activating/Deactivating the alarm
To activate/deactivate the alarm, simultaneously press the
on the receiver until the 4 indicator lights flash rapidly.
The alarm emits a beep if it has been activated.
1
2
STOP
11
1
• alarm operation
The alarm is triggered for 2 minutes if the door is raised manually.
No movement of the door is possible when the alarm is sounding.
When the alarm sounds, press a button on a remote control memorised in the
receiver to stop it. The alarm can only be stopped with a memorised remote
control.
• alarm operation test
Simultaneously press then quickly release the
receiver.
The alarm triggers briefly to indicate that it is activated.
1
STOP
Safety Edge
KeySwitch
Flash
Sec
7
8
9
10
11
12
13
1
STOP
3
4
Prog
and
STOP
2
3
4
Prog
Copyright © 2014 Somfy SAS. All rights reserved.
24V
14
1
and
buttons
STOP
2
3
4
Prog
buttons on the