Installing The Microphone; Mounting On The Sun Visor; Installation On The Steering Column; Adjusting The Microphone Angle - Pioneer DMH-ZS9350BT Guia De Inicio Rapido

Receptor rds av
Ocultar thumbs Ver también para DMH-ZS9350BT:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installing the
microphone
• Install the microphone in a place where
its direction and distance from the driver
make it easiest to pick up the driver's
voice.
• Be sure to turn off (ACC OFF) the product
before connecting the microphone.
• Depending on the vehicle model, the
microphone cable length may be too
short when you mount the microphone
on the sun visor. In such cases, install the
microphone on the steering column.

Mounting on the sun visor

1
Fit the microphone lead into the
groove.
Microphone lead
Groove
2
Attach the microphone clip to the sun
visor.
Microphone clip
Clamps
Use separately sold clamps to secure
the lead where necessary inside the
vehicle.
Install the microphone on the sun visor
when it is in the up position. It cannot
recognise the driver's voice if the sun
visor is in the down position.
Installation on the steering
column
1
Detach the microphone base from the
microphone clip by sliding the
microphone base while pressing the
tab.
Tab
Microphone base
2
Mount the microphone on the
steering column.
Double-sided tape
Clamps
Use separately sold clamps to secure
the lead where necessary inside the
vehicle.
NOTE
Install the microphone on the steering
column, keeping it away from the steering
wheel.

Adjusting the microphone angle

The microphone angle can be adjusted.
15
En

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dmh-z6350bt

Tabla de contenido