Basic Operation - Danfoss ERC213 Manual Del Usuario

6 - Basic operation

Adjust the setpoint temperature
Initiate a manual defrost
| 10
(short press) SET: adjust setpoint temperature.
UP/DOWN: change the temperature setpoint
(in setting mode the setpoint flashes).
SET: save the temperature setpoint.
DEFROST: press for 3 seconds to initiate a defsost.
DEFROST: press for 3 seconds to stop manual defrost.
The DEFROST icon is shown during defrost.
Instruction sheet | ERC 213 DKRCC.EI.RL0.G2.ML/520H9654