Danfoss ERC213 Manual Del Usuario página 7

Quick Configuration at Power Up
STEP 4: Select sensor type "o06"
y
The display automatically shows sensor selection parameter "o06".
Press SET to select the sensor type.
The display shows the default value (eg. "n10" flashing).
Choose sensor type by pressing UP/DOWN (n5=NTC 5 K, n10=NTC 10 K, Ptc=PTC, Pt1=Pt1000) and press SET to
confirm.
NOTE: All sensors must be the same type.
DKRCC.EI.RL0.G2.ML/520H9654 Instruction sheet | ERC 213 | 7