Danfoss ERC213 Manual Del Usuario página 18

Parameter name
Sensor type selection
n5=NTC 5 K, n10=NTC 10 K,
Ptc=PTC, Pt1=Pt1000
Display resolution
0.1=steps of 0.1 °C, 0.5=steps of 0.5 °C,
1.0=steps of 1.0 °C
Relay 1 counter
(1 count=100 cycles of operation)
Relay 2 counter
(1 count=100 cycles of operation)
Relay 3 counter
(1 count=100 cycles of operation)
DI2 configuration
oFF=not used, Sdc=status display output,
doo=door alarm with resumption,
doA=door alarm without resumption,
SCH=main switch, nig=day/night mode,
rFd=reference displacement,
EAL=external alarm, dEF=defrost,
Pud=pull-down
Light control
on=always on, dAn=day/night,
doo=based on door action
Predefined applications
Save settings as factory
WARNING: the earlier factory settings are
overwritten
DO2 configuration
(dEF=defrost, ALA=alarm)
Display at defrost
Air=actual air temperature,
FrE=freezed temperature, -d-="-d-" is displayed
| 18
Code Min Max Unit
o06 n5 Pt1
o15 0.1 1.0
o23 0 999
o24 0 999
o25 0 999
o37 oFF Pud
o38 on doo
o61 AP0 AP6
o67 no yES
o71 dEF ALA
o91 Air -d-
Instruction sheet | ERC 213
App. 0
App. 1 App. 2 App. 3 App. 4 App. 5 App. 6
(Def.)
n10 n10 n10 n10
0.1 0.1 0.1 0.1
0 0 0 0
0 0 0 0
0 0 0 0
oFF oFF oFF oFF
on on on on
AP0 AP1 AP2 AP3
no no no no
dEF ALA dEF dEF
-d- -d- -d- -d-
DKRCC.EI.RL0.G2.ML/520H9654
n10 n10 -
0.1 0.1 0.1
0 0 -
0 0 -
0 0 -
oFF oFF oFF
on on on
AP4 AP5 -
no no -
dEF dEF dEF
-d- -d- -d-