Danfoss ERC213 Manual Del Usuario página 19

Parameter name
Polarity
DI1 input polarity
nc=normally closed, no=normally open
DI2 input polarity
nc=normally closed, no=normally open
Invert alarm relay
0=normal, 1=invert relay action
Keyboard lock enable
Readouts
Controller Status
S0=cooling ON/Heating ON,
S2=wait for compressor ON time to elapse,
S3=wait for compressor OFF time to elapse-restart
time, S4=drip OFF delay after defrost, S10=cooling
stopped by MainSwitch=OFF, S11=cooling stopped
by thermostat/heating OFF, S14=defrosting state,
S15=fan delay state after defrost, S17=door open
(DI input), S20=emergency cooling, S25=manual
control of outputs, S30=continous cycle/Pull-down
S32=delay of outputs at power up
Air temperature (Sair)
Read the present regulation reference
Defrost temperature (S5)
DI1 input
Status of night operation
DI2 input
Condenser temperature (Sc)
Compressor relay status
Fan relay status
Defrost relay status
Light relay status
Firmware version readout
DKRCC.EI.RL0.G2.ML/520H9654
Code Min Max Unit
P--
P73 nc no
P74 nc no
P75 0 1
P76 no yES
u--
u00 S0 S32
u01 -100.0 200.0 C/F
u02 -100.0 200.0 C/F
u09 -100.0 200.0 C/F
u10 oFF on
u13 oFF on
u37 oFF on
U09 -100.0 200.0 C/F
u58 oFF on
u59 oFF on
u60 oFF on
u63 oFF on
u80 000 999
Instruction sheet | ERC 213
App. 0
App. 1 App. 2 App. 3 App. 4 App. 5 App. 6
(Def.)
no no no no
no no no no
0 0 0 0
no no no no
--
---
---
--- - - -
---
---
---
---
---
---
---
---
---
no no no
no no no
0 0 -
no no -
| 19