Putting Into Operation - Abicor Binzel SR/ABITIG 9 Instructivo De Servicio

Valve torch SR/ABITIG

4 Putting into operation

DANGER
Risk of injury due to unexpected start-up.
For the entire duration of maintenance, servicing, dismounting and repair work, the following
instructions must be adhered to:
• Switch off the power source.
• Close off the gas supply.
• Disconnect all electrical connections.
• Switch off the entire welding system.
NOTICE
• Please take note of the following instructions:
 3 Product description on page EN-5
• The system must only be installed and put into operation by qualified personnel (in
Germany, see TRBS 1203).
BAL.0271.0 • 2018-07-24
®
4 Putting into operation
EN - 7