DENTSPLY Triad 2000 Manual De Instrucciones página 4

TRIAD
GENERAL DESCRIPTION & SPECIFICATIONS
The DENTSPLY Triad 2000 Light Curing Unit is
a precision engineered unit, constructed to exacting
specifications with the finest materials and work-
manship. It contains controls and components for
curing Triad visible light activated materials. The
unit is manufactured and distributed by DENTSPLY
International Inc., York, PA, through authorized den-
tal dealers throughout the world.
The DENTSPLY Triad 2000 Unit incorporates
specific controls with a rotating platform and lift, and
through a tungsten halogen light source, cures light-
activated materials by use of visible light. The
adjustable table features selective controls to accom-
modate the processing of all types of visible light
cure materials in various appliance shapes, with or
without the use of a model (cast).
Refer to Figure 1 for location of the following unit
controls and components:
POWER: On/Off switch. The cooling fan will
operate.
TABLE: Activates rotation of the table.
® 2000 LIGHT CURING UNIT
On/Off switch. Activates the lamp when
access door is closed. (Access door actu-
CURE:
ates safety interlock switch.)
Rotating timer dial programs processing
time.
TIMER:
The turntable is raised and lowered by the
TURNTABLE:
top-mounted lift knob. The turntable will
raise or lower to internal stops. The rota-
tion of the turntable is provided by a gear-
motor operating at 6 rpm. Rotation is acti-
vated by the table switch.
Contains a high-power, specially angled
CURING CHAMBER:
tungsten halogen reflector lamp which
projects optimum photocure light on the
turntable location. The lamp is mounted
to be replaced easily.
One 12 watt, 115V fan operates when the
COOLING FAN:
power switch is ON, cooling the lamp
housing and the curing chamber.
FIGURE 1
1. POWER Switch
2. CURE Switch
3. Lift Knob
4. TIMER Dial
5. Table Switch
6. Lamp and Mounting Assembly
7. Curing Chamber Door
8. Safety Interlock Actuator
9. Curing Chamber
3