Klarstein Cook n Roll Pro Manual De Instrucciones página 29

Error codes
E0 Internal circuit error
E1 Without cookware or Incompatible cookware
used
E2 Internal overheat
E3 Over-voltage
E4 Under-Voltage
E5 Top plate sensor open/short circuit
E6 IGBT sensor open circuit/short circuit
E7 Top plate overheat
When showing error signal
E1, E2 and E7, please check
whether the cookware is not
suitable, or switch on the
appliance again after it is
cooled down naturally.When
showing E0, E3-E6, please
contact Service Centre for
checking and repairing.
EN
29