American Standard 730236 Manual De Uso página 2

4
Before applying the sealant, place the sink
temporarily into the cut-out. Check for alignment
and clearance. Then mark the sink and
countertop in several places as a guide for the
installation location.
5
After checking fit and alignment, turn sink upside
down and apply a generous portion of sealant
around the underside of the rim near the edge.
Carefully lower sink in place, align with marks
made earlier, and press down firmly. Allow sealant
to set before connecting supplies and drain.
If inspection of this AS America, Inc. (" American Standard") plumbing product, within one year after its initial purchase, confirms that it is
defective in materials or workmanship, American Standard will repair or, at its option, exchange the product for a same or similar model.
This limited warranty applies only to the original purchaser and installation of these products. In the event of a limited warranty claim, proof
of purchase will be required—save sales receipts.
This limited warranty does not apply to local building code compliance. Since local building codes vary considerably, the purchaser of this
product should check with a local building or plumbing contractor to insure local code compliance before installation.
This limited warranty will be void if the product has been moved from its initial place of installation; if it has been subjected to faulty
maintenance, abuse, misuse, accident or other damage; if it was not installed in accordance with American Standard's instructions; or if it
has been modified in a manner inconsistent with the product as shipped by American Standard.
American Standard's option to repair or exchange the product under this limited warranty does not cover any labor or other costs of removal
or installation including any costs of any surrounding material such as tile or marble. American Standard is not responsible for any other
incidental or consequential damages attributed to a product defect or to the repair or exchange of a defective product, all of which are
expressly excluded from the warranty. This limited warranty does not cover the extension beyond the duration of this limited warranty of any
implied limited warranties, including those of merchantability or fitness for an intended purpose. (Some states or provinces do not allow the
exclusion or limitation of implied warranties, so this exclusion may not apply to you.)
This limited warranty gives you specific legal rights. You may have other statutory rights that vary from state to state or from province to
province, in which case this limited warranty does not affect such statutory rights.
For service under this warranty, it is suggested that a claim be made through the contractor or dealer from or through whom the product was
purchased, or that a service request (including a description of the product model and of the defect) be sent to the following address:
In the United States:
American Standard Brands
P.O. Box 6820
Piscataway, New Jersey 08855
Attention: Director of Consumer Affairs
For residents of the United States, warranty
information may also be obtained by calling
the following toll free number: (800) 442-1902
www.americanstandard-us.com
THIS WARRANTY IS NOT TRANSFERABLE FROM ORIGINAL CONSUMER PURCHASER.
6
7
AS AMERICA, INC. ONE YEAR LIMITED WARRANTY
In Canada:
AS Canada ULC
5900 Avebury Ave.
Mississauga, Ontario
Canada L5R 3M3
Toll Free: (800) 387-0369
www.americanstandard.ca
2
Connect supply line to faucet (finger tight) and
carefully bend tubes to engage with the supply
shut-off valves. Tighten connections at faucet and
shut-off valves for secure seal.
Connect trap to drain assembly hand tight to check
alignment. It may be necessary to cut off part of the
tailpiece (area "B") or part of the horizontal leg of the trap
(area "C"). Secure joints for watertight assembly.
B
Shut-Off
Valves
C
In Mexico:
Customer Service Manager
AS Maquila, S.A. de C.V.
Via Morelos #330
Col. Santa Clara
Ecatepec 55540 Edo. Mexico
www.americanstandard.com/mx
730236-100 Rev. G