Performance (Manual); Performance (Preset) Profile; Performance (Individual); Hrc (Manual) - Kettler SG1 Instrucciones De Entrenamiento Y Operación

Training and operating instructions

Performance (manual):

Changing the performance while working out. Features such
as Time, Distance... may be increased or decreased.
Performance (preset):
The performance will be controlled by performance profiles.

Performance (individual)

Adjust the performance profile according to your require-
ments.

HRC (manual)

HRC =Heart Rate Control.
Enter a pulse rate and the performance will be controlled
automatically by your pulse rate.
HRC (fixed)
Pulse-profile programmes control the performance according
to changing pulse rates.

HRC (individual)

Adjust basic pulse-profile programmes according to your
requirements.
Programmes –> Performance (manual)
Under the option "Performance (manual)", there are two work-
out programmes: "Count Up" and "Count Down". Use both
programmes to adjust the performance while working out.
"Count Up" increases and "Count Down" decreases the set-
tings you entered or that were taken over from the menu:
Presets –> Workout Settings
Use the navigation keys "Up" and "Down" to highlight the
selection in black and to activate.
Press "Standard" to select the highlighted programme as
Standard programme of the "active" user.
Press "Training" to select the highlighted programme and to
view the "Ready for Training" mode.
"Presets" displays the Presets that yet need to be or have
already been entered into "active" programmes.
Remark:
The functions assigned to the function keys do not change
when selecting a workout programme. To avoid redundancy,
6
GB
they will not be repeated in the following.
Programmes –> Performance Profiles (fixed)
Under the option "Performance Profile (preset)", 10 training
profiles of varying duration and intensity are listed.
Performance will be adjusted according to profile presets.
Next to the programme number, the duration and the distance
of the programme are indicated.
Use the navigation keys "Up" and "Down" to highlight in
black and to activate.
Programmes –> Performances (individual)
Under the option "Performance Profiles (individual)", 5 work-
out profiles are listed. Duration, distance and intensity of these
profiles may be changed.
Note:
On how to create"Performance Profiles (individual)" pressing
"Edit", please see page 14.
Programmes –> HRC programmes (manual)
The menu item "HRC (manual)" contains two training pro-
grammes: "Count Up" and "Count Down". In both program-
mes a target pulse is achieved by performance regulation and
is maintained over the training period. The target pulse is eit-
her adopted from the default settings in the menu: Default
Settings –> Default Setting Pulse or is set to 130, if no data is
available. The values, which you preset or which have been
adopted from the default settings in the menu: Default Settings
–> Training values, are counted up in the "Count Up" mode
and are counted down in the "Count Down" mode.
Programmes –> HRC (fixed)
The menu item "HRC (fixed)" contains 5 training profiles,
which differ in duration and intensity. In these programmes,
changing target pulses are achieved by performance regulati-
on. The profile height of the programme depends on the
entries of your maximum pulse in the menu: Default Settings –
> Default Setting Pulse. If no data is available, an age of 50
years and a maximum pulse of 170 are set automatically.
Programmes –> HRC (individual)
The menu item "HRC (individual)" contains 3 training profiles.
You can edit the duration and the intensity of these profiles.
Note:
On how to create an "HRC (individual)" pressing "Edit", plea-
se see page 15.

Training

Selecting a training programme
You can select two different programmes:
1. Training according to performance default settings
a) Manual performance input