Removing And Installing Blades Fig; Removing Blade - Bosch CM8S Instrucciones De Funcionamiento Y Seguridad

2610051821.qxp_BM CM8S 9/19/18 2:55 PM Page 17
▶ Removing and Installing Blades
source before
adjustments or repairs.

▼ REMOVING BLADE

▼ INSTALLING 8-1/2" BLADE
8 - 1 ⁄ 2 " diameter and 5/8" arbor. The blade's
maximum plate thickness is 0.070".
(RPM) or greater.
counterclockwise
interfere with the table insert at 0° and 45° bevel
positions. Lower the blade into the blade slot and
check for any contact with the base or turntable
structure. If the blade contacts base or table,
seek authorized service.
Assembly
To avoid possible injury,
disconnect plug from power
performing any assembly,
To avoid injury, do not use a
blade larger or smaller than
To reduce risk of injury, use
saw blade rated 5600/min
After installing a new blade,
make sure the blade does not
FIG. 3
Outer Washer
Blade Bolt
17
Blade
Rotation
Arrow
Blade Bolt
FIG. 4
Saw Blade
Inner Washer
Arbor Shaft
Support Ring