Belkin N1 Vision Manual Del Usuario página 35

Alternate Setup Method
4. Login/Logout Button – This button enables you to log in and out
of the N1 Vision with the press of one button. When you are logged
into the N1 Vision, this button will change to read "Logout". Logging
into the N1 Vision will take you to a separate login page where you
will need to enter a password. When you are logged into the N1
Vision, you can make changes to the settings. When you are finished
making changes, you can log out of the N1 Vision by clicking the
"Logout" button. For more information about logging into the N1
Vision, see the section called "Logging into the N1 Vision".
5. Help Button – The "Help" button gives you access to the N1
Vision's help pages. Help is also available on many pages by
clicking "more info" next to certain sections of each page.
6. LAN Settings – Shows you the settings of the Local Area
Network (LAN) side of the N1 Vision. Changes can be
made to the settings by clicking on any one of the links (IP
Address, Subnet Mask, DHCP Server) or by clicking the
"LAN" quick-navigation link on the left side of the screen.
7. Features – Shows the status of the N1 Vision's NAT, firewall,
and wireless features. Changes can be made to the settings
by clicking on any one of the links or by clicking the quick-
navigation links on the left side of the screen.
8. Internet Settings – Shows the settings of the Internet/WAN side of
the N1 Vision that connects to the Internet. Changes to any of these
settings can be made by clicking on the links or by clicking on the
"Internet/WAN" quick-navigation link on the left side of the screen.
9. Version Info – Shows the firmware version, boot-code version,
hardware version, and serial number of the N1 Vision.
10. Page Name – The page you are on can be identified by this name.
This User Manual will sometimes refer to pages by name. For
instance "LAN > LAN Settings" refers to the "LAN Settings" page.
33
1
2
3
4
5
6
7
8
9
10