Belkin N1 Vision Manual Del Usuario página 19

Connecting and Configuring your N1 Vision
Options
1. Network Name – This is the name of the N1 Vision.
2. Network Key – Create a wireless security WPA key by typing
any 8 to 63 alphanumeric characters in length. Any wireless
devices will need this key to connect to the N1 Vision.
3. Guest Mode – When enabled, this mode will create a new
network to which guest users can connect that will separate them
from access to your other network and connected devices.
E. If your Internet account requires a
user name and password, you will be
taken to the screen below to enter
this information. Click "Next" to save
and continue.
F. The N1 Vision will now check for your
Internet connection.
G. You will see the Congratulations
screen when your N1 Vision can
connect to the Internet. You have
finished installing your new Belkin
N1 Vision and can begin surfing by
opening another browser and going
to any website. You may also choose
to change your network name, set up
a wireless security key, or enable the
guest mode from this screen.
17
1
2
3
4
5
6
7
8
9
10