Belkin N1 Vision Manual Del Usuario página 97

Troubleshooting
I can't connect to the Internet wirelessly.
If you are unable to connect to the Internet from a wireless computer, please
check the following items:
1. Look at the lights on your N1 Vision. They should be as follows:
• The "router" icon should be on.
• The "radio wave" icon above the "router" icon should be on.
• The "modem" light should be on, and not blinking.
• The "internet" icon should be on, and not blinking.
• The "Wireless" light should be on, not blinking.
2. Open your wireless utility software by clicking on the icon in the system
tray at the bottom, right-hand corner of the screen.
3. The exact window that opens will vary depending on the model of
wireless card you have; however, any of the utilities should have a list of
"Available Networks"—those wireless networks it can connect to.
Does the name of your wireless network appear in the results?
Yes, my network name is listed –go to the troubleshooting solution titled
"I can't connect to the Internet wirelessly, but my network name is listed".
No, my network name is not listed –go to the
troubleshooting solution titled "I can't connect to the Internet
wirelessly, and my network name is not listed".
95
1
2
3
4
5
6
7
8
9
10