Belkin N1 Vision Manual Del Usuario página 105

Troubleshooting
3. Under the "Wireless Networks" tab, click
the "Configure" button and you will see the
following screen.
4. For a home or small business user, select "WPA-PSK" under "Network
Administration".
Note: Select WPA (with radius server) if you are using this computer to
connect to a corporate network that supports an authentication server
such as a radius server. Please consult your network administrator for
further information.
5. Select "TKIP" or "AES" under "Date Encryption". This setting will have to
be identical to the N1 Vision that you set up.
6. Type in your encryption key in the "Network key" box.
Important: Enter your pre-shared key. This can be from eight to 63
characters and can be letters, numbers, or symbols. This same key must
be used on all of the clients that you set up.
7. Click "OK" to apply settings.
What's the difference between 802.11b,
802.11g, 802.11a, and draft 802.11n?
Currently there are four levels of wireless networking standards, which transmit
data at very different maximum speeds. Each is based on the designation
for certifying network standards. The most common wireless networking
standard, 802.11b, transmits information at 11Mbps; 802.11a and 802.11g work
at 54Mbps; and draft 802.11n works at 108Mbps. See the chart on the next
page for more detailed information.
103
1
2
3
4
5
6
7
8
9
10