Belkin N1 Vision Manual Del Usuario página 80

Using the Web-Based
Advanced User Interface
3. The "Update Firmware"
box will now display the
location and name of
the firmware file you just
selected. Click "Update".
4. You will be asked if you are
sure you want to continue.
Click "OK".
5. You will see one more message. This message tells you that the N1 Vision may
not respond for as long as one minute as the firmware is loaded into the N1
Vision and the N1 Vision is rebooted. Click "OK".
6. A 60-second countdown will appear on the screen. When the countdown
reaches zero, the N1 Vision firmware update will be complete. The N1 Vision
home page should appear automatically. If not, type in the N1 Vision's address
(default = 192.168.2.1) into the navigation bar of your browser.
78