Operating Instructions; Pad Locking - Tuthill Fill-Rite 3200 Serie Manual De Instalación, Operación Y Seguridad Del Propietario

Operating Instructions

CAUTION! Always keep the nozzle in contact with the container being filled
during the filling process to minimize the possibility of static electricity build up.
1. If so equipped, reset Meter to "0" (do not
reset while in use as this can cause
damage to the meter).
2. Remove dispensing nozzle from nozzle
boot.
3. Move the switch lever to the "ON"
position to power the pump (figure 5).
4. Insert the dispensing nozzle into the
container to be filled.
5. Operate the nozzle to dispense fluid;
release nozzle when the desired amount
of fluid has been dispensed.

Pad Locking

Your Fill-Rite pump nozzle can be
pad locked to the pump for added
security. With the pump turned off,
and the nozzle in the stored
position, a pad lock can be
inserted through the locking link
and the nozzle handle opening.
This configuration prevents the
nozzle from being removed from
.
the nozzle cover
The locking link is located on the
nozzle side of the pump, and can
be pivoted into position to work
with a variety of nozzles (Figure 7).
Use the appropriate position and
hole to lock your nozzle securely
to your FR3200 series pump.
Figure 6
"OFF" position
Figure 5
"ON" position
6. Move switch lever to the "OFF"
position (Figure 6) to turn off the
pump.
7. Remove the dispensing nozzle
from the container being filled
and store it in the nozzle boot.
Locking Link
10
Figure 7