Controls And Displays - Seca 763 Manual De Instrucciones Y Garantía

5. Operation

Controls and displays

The controls and display are in the display part.
Switching the device on and off
Press button briefly → switch between kg and lbs
hold down
In the function menu → Raise the value
Press button briefly → Active/deactivate hold function
Press button down
and hold briefly
In the function menu → Lower the value
Activate BMI function, confirm
Toggling the unit of height measurement between cm and inch
Setting the height measurement to zero for relative measurements
Pushing button to mark the valid height measurement value
20
→ switch between kg and sts
→ Set the display to zero, activate/deactivate TARE