Taring Weight Display (Tare) - Seca 763 Manual De Instrucciones Y Garantía

Taring weight display (TARE)

The TARE function is useful if an additional weight should not be considered while
weighing.
Proceed as follows:
– Press the green Start button.
– First, place the additional weight onto
the scales and activate the TARE
function by pressing down and briefly
holding down the HOLD/TARE but-
ton.
The display is reset to zero.
pears in the display "NET" appears in
the display.
– Now place the patient onto the scales
with the previously weighed additional
weight.
The scales show the weight of the pa-
tient without the additional weight.
You can now perform as many weigh-
ing operations as you like.
– Deactivate the TARE function by
pressing the button down and holding
it briefly once again; this puts the
scales back into the normal weighing
mode, the tare value (the additional
weight value) is deleted.
– The tare value is likewise erased
when the scales are switched off.
22
ap-