Articulating Smart Phone Holder Mount - Segway 24078-00001 Manual De Instalación

Articulating Smart Phone Holder Mount

24049-00001
Tools required
• None
Installation
1. Make sure the PT is powered off and unplugged.
2. Install the extension arm onto the Phone Holder mounting ball, then
mount the Phone Holder and extension arm to one of the mounting balls
on the Handlebar Accessory Mount Base.
3. Orient the Phone Holder to your preference, then tighten the extension
arm securely.
NOTE
Be sure to periodically check the tightness of all fasteners and the
extensions.
Removal
1. Loosen the extension arm, then remove the Phone Holder and extension
arm from the Handlebar Accessory Mount Base.
NOTE
Refer to the Weight Limits and Maximum Allowable Cargo Weight
sections (p. 3) before using this accessory.
Do not text while riding. This will interfere with your ability to monitor
your surroundings while riding, which can lead to an increased risk of
serious injury, death, or damage to property from falls or collisions.
Parts
(1) RAM ® X-grip Phone Holder
(1) 3-inch extension arm
12
IMPORTANT
Be sure to read and understand all
warnings (p. 3) at the beginning of
this Installation Manual.
Tighten here
Figure 17. Install Smart Phone Holder
Mounting Ball