Bosch GSR12V-300FC Instrucciones De Funcionamiento Y Seguridad página 9

Model number
Voltage rating
No load speed 1
No load speed 2
Maximum Capacities:
Bit holder
Drill chuck
Driving screw sizes
Drilling wood
Allowed ambient temperature
– during charging
– during operation/
storage
Please refer to the battery/charger list, included with your tool.
Disconnect battery pack from tool before making any assembly, adjustments
or changing accessories. Such preventive safety measures reduce the risk of
starting the tool accidentally.
▶ Inserting and releasing
battery pack
Release battery pack 5 from tool by pressing
on both sides of the battery release tabs 4
and pulling battery downward (Fig. 2).
To insert battery, align battery and slide bat-
tery pack 5 into tool until it locks into posi-
tion. Do not force.
wise damaged, do not insert into tool. Bat-
tery can fall out during operation.
2610051918.indd 9
Specifications
GSR12V-300FC
10.8V/12V
n 0–460/min
0
n 0–1,750/min
0
1/4" (6.35mm) Hex-shank with power groove
Ø 3/8" (10mm)
5/16" (8mm)
1-1/4" (32mm)
32...113 °F (0...+45 °C)
–4...122 °F (–20...+50 °C)
Battery Packs / Chargers:
Assembly
If battery release tabs
are cracked or other-
MAX
Fig. 2
5
4
9
6/11/19 2:10 PM