Adjusting The Focus - HP IP400 Manual Del Usuario

Adjusting the Focus

Place the projector on a flat surface and
the lens toward a wall or a projection screen.
Adjust the focus by toggling the focus wheel
to achieve a sharp and clear picture at your desired projection distance.
IP400 can project clearly from 50 to 319cm (20" ~ 125") distance
and with projection size from 51 to 305cm (20" ~ 120")
Projector On-Screen Display Menu
IP400 allows for adjustments of Audio Volume, Brightness, Keystoning and
Projection Placement.
Press and to adjust audio volume Up and Down.
Press "MODE" to switch between Brightness, Keystone and Projection
Placement. Then press "SELECT" to change and activate the setting.
Brightness:
Used to adjust the projection brightness
Enhanced mode for the brightest projection performance.
Optimal mode (default) for the balance between projection
performance and battery life.
Economic mode, recommended for power saving.
User Manual
4