O P E R AT I N G I N S T RU C T I O N S
CONTROL PANEL
Throughout this manual, features and appearance may vary from your model.
1
7
OVEN CONTROL, CLOCK, AND TIMER FEATURES
1
CLOCK Pad: Press before setting the time of day.
COOK TIME Pad: Press and then use the + and -
2
pads to set the amount of time you want your food to
cook. The oven will shut off when the cooking time
has run out.
3
Display: Shows the time of day, oven temperature,
whether the oven is in the bake, broil or self-cleaning
mode, and the times set for the timer or automatic
oven operations.
BROIL Pad: Press to select the broil function.
4
BAKE Pad: Press to select the bake function.
5
START Pad: Must be pressed to start any cooking or
6
cleaning function.
NOTE:
If F– and a number appear in the display and the oven control signals, this
indicates a function error code.
See page 34.
Press the CLEAR OFF pad. Allow the oven to cool for one hour. Put the oven
back into operation.
If the function error code repeats, disconnect the power to the oven and call for
service.
If your oven was set for a timed oven operation and a power outage
occurred, the clock and all programmed functions must be reset.
The time of day will flash in the display when there has been a power
outage.
12
2
3
8
9
START TIME Pad: Use along with Bake, Cook Time,
7
and Self Clean pads to set the oven to start and stop
automatically at a time you set.
8
TIMER ON/OFF Pad: Press to select the timer
feature.
+/- Pad: Enters or changes time, oven temperature.
9
Sets HI or LO broil.
SELF CLEAN Pad: Press to select self-cleaning
10
function. See the using the Self-Cleaning Oven
section, page 22.
OVEN LIGHT Pad: Press to turn the oven light on or
11
off.
CLEAR OFF Pad: Press to cancel all oven operations
12
except the clock and timer.
4
5
6
10
11
12