SOMFY HOME MOTION AXOVIA Passeo 600 Manual Del Usuario página 23

Parametering your PASSEO/AXOVIA
2
•
Automatic mode :
The gate closes by itself after your passage, without pushing again on the remote control,
after a time that you have previously defined.
The automatic mode will be operational after wiring the cells and the following setting :
1
• Place a remote control as close
as possible to the target engra-
ved on the motorization hood.
> The AUTO light goes off.
2
• Hold down the button designed
for opening both leaves until the
AUTO light is lit. Release.
> The AUTO light blinks.
3
• Start opening (normal distance)
with the remote control.
> The gate opens at the nominal
speed.
4
• Once the gate is completely open :
- Wait for the desired time delay.
- Launch a closing order by pushing again on the same button.
> Both leaves close almost simultaneously.
> The AUTO light remains permanently lit.
The automatic mode is now operational.
5s
1s
Using your PASSEO/AXOVIA
I Functionning in automatic mode
I n a u t o m a t i c f u n c t i o n i n g , p u s h i n g o n t h e re m o t e c o n t ro l b u t t o n p ro v o k e s
o p e n i n g o f t h e g a t e . I t s c l o s u re i s d o n e a u t o m a t i c a l l y a f t e r a t i m e d e l a y
p re v i o u s l y a d j u s t e d b y y o u .
It is possible to maintain the gate in the open position by giving a stop order (push again on
the remote control button) :
• at the end of opening, • at the beginning of closing.
or
STOP
STOP
I Going from auto mode to normal mode
STOP
In order to return to the sequential mode (the AUTO light is lit) :
• Place the remote control on the target engraved on the hood.
• Push on a button of the remote control until the AUTO light goes off.
> The normal mode (sequential functioning) is active.
STOP
5s 1s
:
STOP
STOP
STO
23