SOMFY HOME MOTION AXOVIA Passeo 600 Manual Del Usuario página 24

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Using your PASSEO/AXOVIA
J Securization of parametering
1
Push on the complete opening button
2
Push a second time on the button so that both leaves stop at mid opening
3
Cut off the mains supply 5 seconds
4
Turn back on the mains supply
5
Push on the complete opening button
The leaves MUST start up in the opening direction.
Using your PASSEO/AXOVIA
I Deleting emitters
1
• Push 1 second on the reset button.
> While pushing, the four lights turn on.
2
• Release the reset button.
> The four lights go off for 2 seconds
> The ON/OFF light turns back on
> The PROG light turns on
All the recorded parameters are deleted : recorded remote control, gate
displacement, functioning mode...
I Subsequent remote control addition
For a subsequent addition of remote controls, redo the following operations :
• Memorization of the remote controls.
• Memorization of gate leaf displacement.
Any new remote control memorization cancels and replaces the
preceding program of gate displacement
lights
24

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Home motion axovia passeo 630Home motion axovia passeo 650

Tabla de contenido