Pairing and connecting a phone
to the Parrot MKi9000
Prior to using your Parrot MKi9000 with your phone for the
very first time, you must initially pair both devices.
1. From your phone, search for Bluetooth
2. Select «MKi9000» in the list.
3. Enter «0000» on your phone when prompted.
> The Parrot MKi9000 says «Pairing successful» .
> The connection will then be automatic as soon as you
enter your vehicle.
Synchronising the phonebook
With some Bluetooth phones, the phonebook is automatically
synchronized in the kit's memory. Only the contacts stored in
the phone memory are synchronized.
If your phone doesn't support automatic synchronization,
you can also use the Object Push function of your phone to
send contacts from your mobile to the car kit via Bluetooth.
To do so:
1. Press the jog wheel and select
contacts.
> The kit says « Waiting for contact ».
2. Refer to your phones' user guide for more information
about sending contacts via Object Push.
14
peripherals.
®
Settings > Receive
Using the telephone function
Before using your Parrot MKi9000 telephone function, you
first have to connect both devices.
Commands
Button
Functions
Short press :
- Answer an incoming call
- Launch voice recognition mode
- Transfer the call on the phone
(discreet mode)
- Exit discreet mode
- Answer a second incoming call /
toggle between two calls
Long press : Call the last dialed number
- Reject an incoming call (or a second
incoming call)
- Hang up
Adjust the communication volume
Short press : Use the DTMF function
(to manage interactive vocal servers)
Mute / unmute the microphone (secret mode)