Introduction; General Warnings; Safety Warnings; Transport And Handling - Barazza 1ABFY Manual De Instalacion Y Uso

1.

INTRODUCTION

1.1

General warnings

This manual constitutes an integral part of the product. It contains information on the installation, use and
safety of the device. Read the instructions carefully.
It is mandatory for the user and installer to read this manual carefully and to always use it as a reference.
It is recommended to store this manual in a known location that is accessible to all authorised operators
(installer, user, maintenance technician) for consultation at all times, and to attach it to the device if
ownership is transferred.
During transport, handling and installation, lay the device with its base on a surface and do not keep it
on sloping surfaces for extended periods of time.
The manufacturer of this device declares that all equipment conforms to current regulations.
1.2

Safety warnings

The user shall be liable for any operations performed on the device without regard for the instructions
contained in this manual.
The device can be used by children over the age of eight and by people with reduced physical, sensory and
mental capabilities, or who lack experience and adequate knowledge, provided they are supervised or have
already received instructions on how to use the device safely and understand the dangers inherent to its
use. Children must not play with the device. Cleaning and maintenance operations, which can be carried
out by the user, must not be performed by children without supervision.
The power cord and outlet must be accessible even with the device is installed. The power cord must not
be subject to bending or crushing, which may compromise its insulation. Do not position power strips or
portable power packs on the rear of the device.
With the device installed, ventilation outlets must not be obstructed.
Caution! Do not use mechanical devices or other means to accelerate the defrosting process other than
those recommended by the manufacturer.
CAUTION: RISK OF FIRE / FLAMMABLE MATERIAL
All electrical parts and cooling circuit parts must be regularly inspected by authorised technical staff only.
The manufacturer declines all liability and all warranty obligations in the event of damage to the device,
persons or property attributable to:
•
incorrect installation and/or use, and/or use in breach of current legislation;
•
failure to comply with health and safety regulations and current legislation during installation;
•
modifications and/or operations not specific to the model;
•
use of non-original spare parts, or which are not specific to the model;
•
failure, even partial, to comply with the instructions in this manual.
1.3

Transport and handling

The device must be loaded and unloaded using suitable transport means, for example a forklift, in the
absence of which at least two persons will be needed for said operations.
Caution! During handling operations all necessary precautions must be taken to avoid damage to persons,
property or the device itself. Specific instructions are reported on the packaging.
4