Kenmore 790.3667 Serie Manual De Uso Y Cuidado página 21

Seff-C eaning (cont'd)
SelfoC_ean Time Length
For satisfactory resuRs, use a 2 hour SeUf-CUean cycle for tight soils and a 3 hour cycUe for average or a 4 hour cycle for
heavy soils, NOTE: The kitchen area shouUd be well ventilated using an open window, ventilation fan or exhaust hood
during the SeUf-CUean cycle, This wHU heUpeliminate the normaU odors associated with the SeUf-CUean cycle,
To Set the Controls for a Seff°C_ean Cycle or a De_ayed Start Seff°C_ean Cycle:
(Note: If you do not want to start a Detayed Self-Clean Cycle, skips steps 2 & 3,)
1, Be sure the clock shows the correct time of day,
2, Press @, The " : " in the time of day will flash,
3, Press and hold the .#_ pad to scroll to the time to start the delayed Self-Clean cycle, Release the pad when the
4,
5,
6,
desired time is displayed,
Press _._t ,, "appears in the display,
Press the A or V once, "3:00" appears in the display for a 3 hour cycle, To change to a 2 hour cycle press V,
"2:00" appears in the display or to select a 4 hour cycle press .#_, "4:00" appears in the display, ::
As soon as the controls are set, the motor driven lock will begin to close automatically and the "LOCK" indicator light : .........
will flash, DO NOT open the oven door while the light is flashing (it takes about 15 seconds for the oven door to lock), i
"CLn" will appear in the display during the Self-Clean cycle and the "LOCK" light will glow until the Self-Cleaning cycle
is complete or cancelled and the oven temperature has cooled,
When the Serf-Clean Cycle is Completed:
1, The time of day or "End" will appear in the display window and the "Clean" and "LOCK" light will continue to glow,
2, Once the oven has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened,
3, If "End" is in the display and the Select Clean indicator light remains ON, press _, The time of day will appear in
the display,
NOTE: When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel,
Stopping or Interrupting a Serf-Cleaning Cycle
If it becomes necessary to stop or interrupt a Self-Cleaning cycle:
1, Press _,
2, Once the oven has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened,
3, Restart the Self-Clean cycle once all conditions have been corrected,
To avoid possible burns use care when opening the oven door after the Self-Cleaning cycle, Stand to the
side of the oven when opening the door to allow hot air or steam to escape,
DO NOT force the oven door open, This can damage the automatic door locking system, Use caution and
avoid possible burns when opening the door after the Self-Cleaning cycle has completed, The oven may still be VERY
HOT,
21