Manual Registration; De-Registering Handsets - Siemens Gigaset 4015 Instrucciones De Manejo E Indicaciones De Seguridad

Press Keys:
NNNNNNNNNNNN
MENU

NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
REGISTER HS
NNNNNNNNNNNNNNNNNNNNNNNNNNNN
REGISTER HS
 
NNNNNNN NNNNNNN
NNNNNNNNNNNN
MENU

NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
DE-REGISTER
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
DE-REGISTER?

Manual Registration

You may also manually register additional handsets
to your base station.
Open the Menu.

Scroll to Register Handsets and press OK.
is displayed.
PIN

NNNNNNN
Enter the 4-digit system PIN (default: 0000) and
press OK (see page 45 for Changing System PIN).
Entry will be flashing.

NNNNNNN
Press OK at the flashing prompt.
Underside of the base station
Hold down the Page/Registration key on the under-
side of the base station for approximately 10 sec-
onds until a signal tone is heard from the base sta-
tion.
If all internal handset numbers are assigned, the in-
tercom number 3 is reassigned. The handset that
has been registered under number 3 will be dereg-
istered.
When it has been successfully registered, the
handset reverts to the idle state.

De-registering Handsets

NNNNNNN
Press the Intercom soft key.
INT
Scroll to the handset to be de-registered.
Open the Menu.

Scroll to De-register and press OK.
is displayed.
PIN

NNNNNNN
Enter the 4-digit system PIN (default: 0000) and
press OK.

Press OK at the prompt.
Handset Operation
37