Split Screen Operation With A Cable Box - Panasonic PT-47WX49 Instrucciones De Operación

SPLIT Screen Operation with a Cable Box

Procedure
r
Note:
Note:
Note:
To view premium (scrambled) cable channels through your cable box in the Main Picture:
Use this procedure if you want to watch premium cable channels in the Main Picture while
viewing a television program or video in the SPLIT frame.
1. Connect cable box to ANT2.
2. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
3. Tune television to Channel 3.
4. Press the SPLIT button on the remote control to display the SPLIT on-screen.
The audio is from the Main Picture only (left side).
5. Verify the cable box is ON.
6. Choose channels for the Main Picture by tuning the cable box.
7. Choose channels for the SPLIT frame by pressing the TV button on the remote control
and using the SPLIT CH up/down buttons.
SWAP is not available when using the cable box to tune channels. If your cable box has a video
output, it can be connected to the television to allow you to use all SPLIT functions. See the
equipment manual for more information. (Press the TV/VIDEO button to select the video input
connected to the cable box).
SPLIT S O
CREEN PERATION
13