?
E017
l
Adjustment span too small
à
Carry out a fresh adjustment and increase
the distance between min. and max.
adjustment
?
E021
l
Scaling span too small
à
Carry out a fresh scaling, increase the
distance between min. and max. scaling.
?
E110
l
Relay switching points too close together
à
Increase the difference between the two
relay switching points
7.3 Instrument repair
If a repair is necessary, please proceed as follows:
You can download a return form (23 KB) in the
Internet from our homepage www.vega.com under:
"Downloads - Forms and Certificates - Repair
form".
By doing this you help us carry out the repair
quickly and without having to call for needed
information.
Print and fill out one form per instrument
l
Clean the instrument and pack it damage-proof
l
Attach the completed form and probably a
l
safety data sheet on the outside of the pack-
aging.
Please ask the agency serving you for the
l
address of your return shipment. You find the
respective agency on our website www.vega.
com under: "Company - VEGA worldwide"
8 Dismounting
8.1 Dismounting steps
Take note of chapters "Mounting" and "Connecting
to power supply" and carry out the listed steps in
reverse order.
VEGAMET 381 Ex
8.2 Disposal
The instrument consists of materials which can be
recycled by specialised recycling companies. We
use recyclable materials and have designed the
electronics to be easily separable.
WEEE directive 2002/96/EG
This instrument is not subject to the WEEE
directive 2002/96/EG and the respective national
laws (in Germany, e.g. ElektroG). Pass the instru-
ment directly on to a specialised recycling com-
pany and do not use the municipal collecting
points. These may be used only for privately used
products according to the WEEE directive.
Correct disposal avoids negative effects to persons
and environment and ensures recycling of useful
raw materials.
Materials: see chapter "Technical data"
If you cannot dispose of the instrument properly,
please contact us about disposal methods or
return.
Dismounting
29