Invacare 1130270 Instrucciones Para El Montaje, Instalación Y Funcionamiento

Hydraulic/Electric Patient Lift Warning Label Kit
Assembly, Installation and Operating Instructions
Kit No. 1130270
To ensure the safe and proper installation of the WARNING/CAUTION labels, these
instructions MUST be followed:
DO NOT install or use this kit without first reading and understanding this
instruction sheet. If you are unable to understand the Warnings, Cautions or
Instructions, contact Invacare Technical Support before attempting to install this
kit - otherwise, injury or damage may occur.
DO NOT use the patient lift without installing these Warning and Caution labels.
The label kit contains the following labels:
PART NUMBER
1130268B
1130230B
1130266A
Installing Warning/Caution Labels
1. Determine the proper location for each label. Refer to FIGURE 1.
NOTE: The English labels are included in FIGURE 1 for ease in determining proper location.
2. Peel one (1) label from the adhesive backing.
3. Position the appropriate warning or caution label directly over the English label at the
location determined in STEP 1.
4. Repeat STEPS 1-3 for each label.
For more information regarding Invacare products, parts, and services,
Part No 1130213
SAVE THESE INSTRUCTIONS
Safety Summary
WARNING
DESCRIPTION OF LABEL
Patient Lift Warning Label 450
Patient Lift Warning Label 600
Mast Bolt Warning Label
please visit www.invacare.com
1
REPLACE LABEL
Hydraulic/Electric Patient Lift Warning Label Kit
1073698B
1070965A
1130200A