Publicidad
Idiomas disponibles
Idiomas disponibles
VISTA CHARCOAL GRILL
ASSEMBLY INSTRUCTIONS
STEP 9: ASSEMBLE THE VENTS
Assemble (2) vents [ V ] to the left and
right panels of the cooking chamber.
Use (1) M6 x 10MM bolt [ BC ] and (1)
M6 locking hexnut [ BS ] per vent.
Tighten but only enough to allow the
vent to move and stay in position.
STEP 10: ASSEMBLE THE LID
Multiple assembly step.
Assemble the (2) lid lower hinges [ AF ]
to the back panel. Align with the holes
(threaded inserts) and use (2) M6 x
45MM bolts [ BE ], (2) flat washers [ BM ]
and (2) locking washers [ BN ] per side.
Do not tighten, keep loose.
Next assemble the (2) lid upper hinges
[ AE ] to the back of the lid [ A ]. Align
with the holes and use (2) M6 x 35MM
bolts [ BD ], (2) flat washers [ BM ], (2)
locking washers [ BN ] and (2) M6
hexnuts [ BH ] per side. Do not tighten,
keep loose.
Carefully place the lid [ A ] on the
cooking chamber and align the hinges.
Insert hinge pins [ BK ] into the hinges
and push a cotter pin [ BL ] into each
hinge pin to secure.
Now tighten all bolts making sure the
lid is in alignment with the cooking
chamber.
DO NOT RETURN PRODUCT TO THE STORE.
IF YOU HAVE QUESTIONS OR HAVE
TROUBLE WITH ASSEMBLY, PLEASE CALL
1-877-347-4557 FOR ASSISTANCE.
PAGE 11
BC
V
STEP
9
AE
BD
BK
BE
BM
BN
STEP
10
BH
BN
BM
AF
BL
BS
V
A
BC
Publicidad
