ABB EOH364JK Boletín De Instrucciones página 15

Installation
Mounting
2
200 A: 6×
400 A, 600 A: 10×
Mounting the safety switch on the wall
or other supporting structure
Mount the safety switch using 3/16" screws (for 200 A: 3 pcs,
for 400 A /600 A: 5 pcs) and 5/16" screws (for 200 A: 3 pcs,
for 400 A /600 A: 5 pcs). Note: Use the keyslot mounting
hole to hang the enclosure while securing the other mounting
screws. Verify that the load-carrying capacity of mounting wall
or supporting structure is sufficient in relation to the weight, size
and way of fixing of safety switch and in accordance with local
requirements.
Anchorage:
– wall-mounted
– mount cabinet on flat surface to avoid distortion
– use shims if necessary
CAUTION
HAZARD OF INJURY OR EQUIPMENT DAMAGE
Do not in any circumstances bend or twist the locking hook fixed on
the door. Wrong position of the door hook causes the malfunction of
the locking mechanism that may result in personal injury or equipment
damage.
Failure to follow these instructions can result in injury or equipment damage.
Instruction Bulletin EOH364/5/6JK/RK/S/SS, 1SCC340032M1401 / A | Installation 1/11
1
1