HP OfficeJet 4650 Serie Manual Del Usuario página 8

Use fax (continued)
Receive a fax manually
If you are on the phone with another person, you can receive faxes manually without hanging up the phone.
1. Make sure the printer is turned on and paper is loaded.
2. Remove any originals from the document feeder.
Set Rings to Answer to a higher number to allow you time to answer the incoming call before the printer does.
Or turn off Auto Answer so that the printer does not automatically answer incoming calls.
3. Ask the sender to start sending the fax.
4. When you hear fax tones, from the Home screen on the printer control panel, touch Fax, touch Send and
Receive, and then touch Receive Now.
When the printer begins to receive the fax, you can hang up the phone or remain on the line. You might not hear
fax tones during fax transmission.
Reprint received faxes from memory
If Backup Fax Reception is turned on, incoming faxes will be stored in memory even when the printer has an error
condition.
Note: All faxes stored in memory might be deleted from memory when the printer is turned off.
1. Make sure paper is loaded in the input tray.
2. From the Home screen on the control panel display, touch Fax.
3. Touch Reprint.
The faxes are displayed in the reverse order from when they were received, with the most recently received fax
displayed first.
4. Select the fax you want to print and touch Print.
Print a report or log
Fax reports provide useful system information about the printer.
1. From the Home screen on the printer display, touch Fax, and then touch Setup.
2. Touch Reports, and touch the report you want to print.
Tip: If you need printed confirmation that your faxes were successfully sent, select Fax Confirmation and then
select the desired option.
8