Seat Unit; Assembly Of The Seat Unit, Assembly Of The Bumper Bar; Open The Bumper Bar; Close The Bumper Bar - Emmaljunga NXT90F Manual De Instrucciones

Seat Unit

Assembly of the Seat Unit, Assembly of the Bumper Bar

1
1.1 The seat unit is delivered fully assembled. Only the bumper bar and the hood must be assembled.
Insert the bumper bar into the brackets on both sides of the seat until you hear a click. There are 2 positions
for the bumperbar.
WARNING The bumper bar should always be assembled when in use.
WARNING Always check that the bumper bar is correctly assembled before use.
1.2.The location that is not used by the bumper bar has blind plugs
1.3 Fasten the crotch strap around the bumper bar.

Open the Bumper Bar

2
2.1 Unbutton the crotch strap.
2.2 Press the button on the inside and open the bumper bar.
WARNING The bumper bar should always be assembled when in use.
WARNING Always check that the bumper bar is correctly assembled before use.

Close the bumper bar

3
3.1 Click the bumper bar into the bracket until you hear a "click".
Fasten the crotch strap around the bumper bar.
WARNING Ensure that children are kept away from all moving parts of the pram to avoid risk of injury.
Assembly / Use of the Hood
4
4.1 Insert the hood in both sides of the seat unit until you hear a click.
4.2 Fasten the back of the hood by using the 3 press studs.
WARNING Ensure that children are kept away from all moving parts of the pram to avoid risk of injury.
Adjust the Hood
5
5.1 Pull the hood gently forward or backward to the desired position.

Extending the Hood

6
6.1 To extend the hood to protect the child from weather you can open the zip on the hood.
WARNING The hood should always be fitted when the pram is in use.
6.2 Pull the hood down and the hood extends, There is a ventilation and UV/insect net built in the back of the
hood (only on certain models).
IMPORTANT! The hood cannot be folded down when the apron is attached to the hood.
UV/Insect Net
7
7.1 UV/Insect net is stored in the pocket at the back of the seat rest
7,2 Attach the UV/Insect net using the zipper on the hood
7.3 Use the press stud to secure the insect net around the band on the seat unit. Repeat on the other side.
7.4 The net is fitted around the footrest.

Assembly of the Seat Unit on the Chassis

8
8.1 Click the seat unit into the chassis, make sure it clicks in properly and securely on both sides.
Adjust to the desired position.
WARNING Ensure that children are kept away from all moving parts of the pram to avoid risk of injury.
WARNING Always check that the seat unit is properly fixed firmly to the chassis before the pram is used.

To take off the Seat Unit from the Chassis

9
9.1 Pull both handles on the sides upwards and lift the seat unit off the chassis.
WARNING Ensure that children are kept away from all moving parts of the pram to avoid risk of injury.
WARNING Never leave a child in the seat unit when removing/attaching the seat unit.
WARNING Hold the carrying handle until the unit is in place.
9.2 Adjust the back rest. The back rest of the seat-unit can be adjusted into various positions.
Adjust the back rest by squeezing the plastic adjuster together on the back of the seat unit and recline the
back rest gently to the desired position. To adjust the back rest into upright position pull the back rest forward.
NXT90 F v 1.5
39