Seat; Assembly Of The Seat; Basket; Assembly Of The Basket - Emmaljunga NXT 30 Manual De Instrucciones

Seat

(1) Assembly of the seat

1.1 Pull the bottom part of the seat over the footrest
1.2 Place the seat over the tube
1.3 Tighten the seat around the tube with the buttons/zipper
1.4 Bring the crutch strap through the seat and textile
1.5-1.7 Put the shoulder and waist straps through the backrest and push to fasten them
1.8-1.10 Put the shoulder and waist straps through the fabric
1.11 Pull the fabric over the backrest
1.12 Put on the top part of the frontbar
WARNING Ensure that it has clicked it position
1.13 Insert the hood in both sides of the seat unit until you hear a click.
1.14 Ensure that both sides have clicked in position
1.15 Fasten the hood on the backrest with the 3 lower buttons
WARNING Ensure that children are kept away from all moving parts of the pram to avoid risk of injury.
1.16 Fasten the fabric with the 2 buttons under the grey handle
1.17 A total of 5 buttons
1.18 Pull the hood gently forward or backward to the desired position.
1.19 To extend the hood to protect the child from weather you can open the zip on the hood.
WARNING The hood should always be fitted when the pram is in use.
1.20 Pull the hood down and the hood extends, There is a ventilation and UV/insect net built in the back of the hood
1.21-1.22 Adjust the back rest. The back rest of the seat-unit can be adjusted into various positions. Adjust the back
rest by squeezing the plastic adjuster together on the back of the seat unit and recline the back rest gently to the
desired position. To adjust the back rest into upright position pull the back rest forward.

Basket

(1) Assembly of the basket

1.1 Fasten the 3 buttons on the back around the tube
1.2 - 1.3 Pull the knobs through the holes
1.4 Fasten the 3 buttons on the front around the tube
34
NXT 30 v 1.7