Festo HMPL-KP Serie Instrucciones De Utilizacion página 18

HMPL−...−KP
5 Commissioning
Please refer to the chapter Commissioning" in the operating instructions for
S
linear module type HMPL−... .
Commissioning an individual unit
Definition
moveable mass = work load + fastening elements
Warning
There is a danger of fingers being
squashed.
S Make sure that:
nobody can place his/her hand in the
path of the piston rod.
there are no objects in the positioning
range of the HMPL−... .
Please note
The actuators will be considerably acceler
ated.
S Make sure that the linear module is pres
surized only in the park position when
clamping is released. Movement against
a non−pressurized chamber will create an
acceleration which can damage the lin
ear module.
Please note
The actuators may make sudden unexpected movements.
S Avoid exceeding the static retention force (see Technical specifications).
The clamped piston rod may move approx. 1...2 mm due to manufacturing
tolerances.
18
Fig. 12
K
h
Ó
h
Ó
Fig. 13
Festo HMPL−...−KP 0501a English
Ó
h
Ó
K
h