Reference Junction, Cold Solder (C.a 65) - Chauvin Arnoux C.A 61 Manual De Instrucciones

3.1.5 Reference junction, cold solder (C.A 65)

Whether in receive or emission mode, the temperature of the reference junction must be
defined as internal or external to the instrument.
Use a miniature compensated plug (plus compensated cables), in the case of an internal
junction, and a miniature copper plug (plus copper cables), if the reference junction is external.
To define the internal or external junction, run the internal program sequence (para-
graph 3.1.1) until "Jr?" is displayed on the screen, then follow the operations described.
Internal program
J ?
In case of incorrect operation, exit programming immediately by pressing the
button and restart the operation.
OFF
JR
J
J
35
instrument in measurement
mode with internal reference
junction
instrument in measurement
mode with external reference
junction