Tabla de contenido
Publicidad
The following safety instructions have been included in this
booklet to provide you with basic information necessary for
safe operation of the Paslode Cordless Framing Nailer. DO
NOT ATTEMPT TO OPERATE THIS TOOL UNTIL YOU
HAVE READ AND UNDERSTAND ALL SAFETY
PRECAUTIONS AND MANUAL INSTRUCTIONS.
In addition to these instructions, training may be necessary.
Contact your Paslode representative for additional
information.
WARNING
The Paslode Cordless
Framing Nailer is an
internal
combustion
device. It produces hot
exhaust gases that may
ignite
flammable
materials. Never use the
tool
in a combustible
environment or in the
presence of combustible
materials,
such
as
flammable chemicals,
adhesives, gasoline, or
solvents.
WARNING
Never attempt to operate
this tool until you have
read and understood all
safety precautions and
manual instructions.
Failure to follow all safety
precautions instructions
may result in a permanent
loss of vision, serious per-
sonal or even fatal injury,
property damage and/or
tool damage.
Safety Instructions
Never expose or store the
tool, fuel or battery at
temperatures in excess of
120° F (49° C). Fuel and/
or the battery may burst,
releasing flammable gas.
This tool must be operated
only in a well-ventilated
environment, because
the tool exhausts carbon
monoxide similar to a gas
chainsaw or lawnmower.
Exposure to carbon
monoxide from use in
eclosed areas, may cause
dizziness, nausea, or
unconsciousness
death.
ALWAYS keep the Cordless
Framing Nailer, fuel cart-
ridge, battery cell and bat-
tery charger out of the reach
of children.
WARNING
WARNING
or
WARNING
5
Publicidad
Tabla de contenido
