Manufacturer's Warranty - Krups LATTECCINO Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
Problem / Malfunction
The coffee tastes bad.
The lid of the filter holder does
not close properly.
The frothing function does not
work.
The two milk buttons are flas-
hing.
The milk is cold.
RECYCLING
Disposal of packaging materials and the appliance.
The packaging exclusively consists of material that is not hazardous for the environment and can
be disposed of in accordance with the recycling provisions in force.
For the disposal of the appliance, contact the corresponding service in your district.
Electronic or electrical products at end-of-life.
Your appliance is designed to operate for many years. However, the day you plan to replace it, do not
throw it away with normal household rubbish or in a landfill but take it to a suitable waste collection point
provided by your local authority (or to a waste collection centre if applicable).
Think of the environment!
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.

MANUFACTURER'S WARRANTY

With a strong commitment to the environment, most of Krups products are
repairable during and after the warranty period. Before returning any defective
products to the point of purchase, please call Krups consumer service directly
14
Possible cause
Coffee maker needs descaling.
Ground coffee not suitable for
filter coffee makers.
Poor quality water.
Filter holder incorrectly inserted.
Frothing tool blocked.
The milk jug is not locked into
position.
The heating control device is
faulty.
Check that the jug is in contact
with the hotplate.
at the phone number below for repair options.
Your help to sustain the environment is appreciated!
Descale the coffee maker.
Use filter coffee.
See "Preparing the coffee" section.
Use filtered or bottled water.
Check that the filter holder is correctly in
place.
Clean the frothing accessory see
paragraph CLEANING THE MILK
FROTHER.
Unlock, remove and replace the milk jug.
Relock it.
Contact the service centre in your
country.
The milk jug should be positioned
correctly on the hotplate.
: www.krups.com
Corrective Action

Publicidad

Tabla de contenido
loading

Tabla de contenido