Philips FC8820 Manual Del Usaurio página 14

English
-
You can also press the start/stop button on the remote control or the
pointer FC only
The start/stop button is continuously on and the robot starts cleaning.
The robot cleans in the auto-cleaning mode until its battery runs low. In
the auto-cleaning mode, it follows repeated sequences of Z-pattern,
random, wall-following and spiral patterns.
Note: To select an individual mode, press one of the mode buttons on
the remote control. See section 'Cleaning mode selection' for more
details.
When the battery runs low, the start/stop button turns orange and the
robot searches for the docking station to recharge.
You can also press the start/stop button to interrupt or stop the cleaning
run. If you press the start/stop button again and there is still enough
energy in the rechargeable battery, the robot continues cleaning in the
auto-cleaning mode.
To make the robot return to the docking station before the rechargeable
battery runs low, press the docking button on the remote control or on
the pointer FC only . The docking indicator on the display of the
robot comes on and the robot returns to the docking station.
Note: If you did not start the robot from the docking station, it does not
search for the docking station automatically when the rechargeable
battery runs low. If there is still enough energy in the rechargeable
battery, you can press the docking button on the remote control or on
the pointer FC only to make the robot return to the docking
station. If the rechargeable battery is completely empty, you have to
place the robot on the docking station manually.