Using Your Robot - Philips FC8820 Manual Del Usaurio

2
1
Preparing the room for a cleaning run

Using your robot

Starting and stopping
Charging automatically during use
When the robot has finished cleaning or when only
power remains, it automatically searches for the docking station to
recharge. When the robot searches for the docking station, the light in the
start/stop button turns orange.
When the rechargeable battery is fully charged, the start/stop button
lights up continuously.
Note: The robot only searches for the docking station automatically when it
started cleaning from the docking station.
Charging directly from the mains
Press the power switch to switch on the robot.
Insert the small plug of the adapter into the socket on the robot
the adapter into a wall socket
When the robot is connected to the mains correctly, the start/stop button
starts flashing slowly. This indicates that the robot is charging.
When the rechargeable battery is fully charged, the start/stop button
lights up continuously.
Before you start the robot on its cleaning run, make sure that you remove all
loose and fragile objects from the floor. Also remove all cables, wires and
cords from the floor.
Set the power switch on the side of the robot to the 'on' position.
Press the start/stop button.
-
You can press the start/stop button on the robot.
% of the battery
.
English
. Insert