Clap Response; Using The Dry Wipe Attachment; Preparing The Dry Wipe Attachment For Use - Philips FC8820 Manual Del Usaurio

English
1
2
3

Using the dry wipe attachment

Press this button to switch off the fan
Press this button to switch on the fan at normal speed.
The turbo fan button increases the fan speed FC

Clap response

The clap response is enabled when the robot enters sleep mode in the
following situations:
- when it stops cleaning due to an error
- when it cannot find its docking station in
If you do not see the robot, you can locate it by clapping your hands once.
The robot will respond by beeping and by lighting up all icons on its display.
The dry wipe attachment is a feature that allows you to clean hard floors
with dry wipes.
Note: If you use the dry wipe attachment, the robot may have trouble
crossing thresholds or climbing onto rugs.

Preparing the dry wipe attachment for use

Turn the robot upside down and place it on the floor or on a table.
Place the dry wipe on a table and place the dry wipe attachment on the
wipe with its fixation lugs pointing towards you.
Fold both ends of the dry wipe around the dry wipe attachment and
fasten the dry wipe onto the attachment by pushing the fixation blocks
into the recesses.
only .
minutes