Descargar Imprimir esta página

Frequently Asked Questions; Need More Help; Storage Of Headset; Certification And Safety Approvals - Jabra FreeSpeak 250 Manual Del Usuario

Publicidad

Idiomas disponibles

Idiomas disponibles

14

Frequently asked questions

1. How far away from my phone will my JABRA FreeSpeak 250 work?
The operating range is typically up to 30 feet.
2. Will JABRA FreeSpeak 250 work with my cordless phone at home?
FreeSpeak 250 is not designed for use with cordless phones.
3. Will JABRA FreeSpeak 250 work with laptops, PCs, and PDAs?
FreeSpeak 250 will work with devices that are compliant with Bluetooth version 1.1
or higher specifications and support the headset and/or hands-free profile(s).
4. Will anything cause interference with my conversation when I'm using my
JABRA FreeSpeak 250?
Appliances such as cordless phones and wireless networking equipment may
cause interference with your conversation, usually adding a crackling noise. To
reduce any interference, keep the headset away from other devices that use or
produce radio waves.
5. Will my JABRA FreeSpeak 250 interfere with my car's electronics, radio,
or computer?
FreeSpeak 250 produces significantly less power than a typical mobile phone. It also
only emits signals that are in compliance with the international Bluetooth standard.
Therefore, you should not expect any interference with standard consumer-grade
electronics equipment.
6. Can other Bluetooth phone users hear my conversation?
When you pair your headset to your Bluetooth phone, you are creating a private
link between only these two Bluetooth devices. The wireless Bluetooth technology
used in your headset is not easily monitored by third parties because Bluetooth
wireless signals are significantly lower in radio frequency power than those
produced by a typical mobile phone.
7. What material is the headset made of?
The MiniGel is made of PVC (polyvinyl chloride), a form of plastic. The headset itself
is primarily made of thermoplastic polyurethane, which is a soft plastic. The face of
the headset, where the buttons are located, is made of polycarbonate, a very strong,
hard plastic. Neither the MiniGel nor the headset contains latex.
8. How do I take care of JABRA FreeSpeak 250?
• To clean the headset, use a clean, soft cloth that is slightly damp.
• To clean the MiniGel, remove it from the headset by gently lifting and pulling it
off the speaker housing. Then, wash it in warm, soapy water.
12
15

Need more help?

1. Web: www.jabra.com/fscs (for the latest support info and online User Manuals)
2. E-mail: Tech Support (North America/Asia-Pacific): techsupp@jabra.com
Information (North America/Asia-Pacific): info@jabra.com
Tech Support (Europe/Middle East/Africa): jabrasupport@gnnetcom.dk
Information (Europe/Middle East/Africa): jabrainfo@gnnetcom.dk
3. Phone: +1 800-327-2230
+1 858-622-9955
16

Storage of headset

1. Always store the JABRA FreeSpeak 250 with power off and safely protected.
2. Avoid storage at high temperatures (above 60°C / 134°F) – such as in a hot vehicle
or in direct sunlight. (Storage at high temperatures can degrade performance and
reduce battery life).
3. Do not expose the headset or any of its supplied parts to rain or other liquids.

Certification and safety approvals

17
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Users are not permitted to make changes or modify the device in any way. Changes or
modifications not expressly approved by JABRA (GN Netcom) will void the user's
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
13

Publicidad

loading