Making And Receiving Calls - Konrow Slider Guia Del Usuario

6. Locking/Unlocking the keypad
To unlock the keypad:
Slide up your Slider to leave standby mode.
Press the up left key.
Then press the hang up key.
To lock the keypad:
Press once the hang up key.
You can configure the screen lock by adding
a password or pattern to be replicated when
unlocking your mobile.
CAUTION: Forgetting
lock password, PIN
permanently blocks your mobile
If this is forgotten or lost, the product
warranty will not cover such an oversight.
Even a "reset"
cannot solve the problem. As a precaution,
take a note of your password or pattern.
PASSWORD: _________________

7. Making and receiving calls

NOTE: It is impossible to make or receive a
call on the two SIM cards at the same time.
For example, if you are on a call on the SIM
1 line, those trying to contact you on SIM 2
will automatically be diverted to voicemail.
In the standby interface, press Dial-pad
enter virtual dial pad, press number keys
to input the area code and the telephone
number, and then press the dial key to dial
a call.
When a call is received press any Dial keys
to pick up the call.
When you want to end a call, press the Hang
up key.
your screen
code or pattern
Lock/Unlock keys
Dial 1 and 2 key
Hang up key
EN