Screen Saver; Manual Setting; Automatic Night Vision; Night Light - Angelcare AC1320 El Manual Del Propietario

5.3 - SCREEN SAVER

Allows you to set the screen saver starting point.
1
2
3

MANUAL SETTING:

To trigger manually the Screen Saver mode press and hold the Parent Unit Video ON/OFF button.

5.4 - AUTOMATIC NIGHT VISION

Allows you to capture image when lighting
is insufficient.
1
A Night Vision icon will appear at the top
of the Parent Unit screen.
2
The Night Vision icon will disappear at the top
of the Parent Unit screen.

5.5 - NIGHT LIGHT

Allows you to use your monitor as a night light.
TO ACTIVATE THE LIGHT:
Push the button on the back of the right "wing"
to turn the Night Light ON or OFF.
5.6 - PAGER
Allows you to locate the Parent Unit.
TO LOCATE PARENT UNIT:
Press the Pager button for less
than 2 seconds. The Parent Unit will emit
a paging sound for one minute.
To deactivate the Pager function, push the Pager
button again.
4
1) Press Menu/Select button to access
main menu.
2) Select the Screen Saver icon.
3) Use the up and down arrows to select
the delay before Video mode turns into
Screen Saver mode (30 seconds to 3
minutes).
4) Press Menu/Select button to confirm.
NOTE:
A black screen will appear when video is on
Screen Saver mode. Press any button to return
to Video mode.
1) The infrared LEDS will turn ON
automatically when the lighting is not
sufficient, to give a night view on LCD
display.
NOTE:
When the Infrared Night Vision is ON, only
black and white image will be displayed on the
LCD screen.
2) If the light is bright enough in the room,
the infrared LED on the Nursery Unit
will turn OFF automatically.
E
N
11